The 1 Hp Weeds B Gone Thruster will allow you to move more water, floating weeds and muck over a bigger area. Your average 3/4 Hp thruster will move top water about 40ft to 50 ft away from your dock. The 1 HP this will push water about 75 to 100 feet away. When mounted near the surface of the water The 1 HP Thruster Preforms with no cavitation sound. Able to operate in water as shallow as 24". 15 amp Breaker recommended. Total component listed to meet UL and CSA Standards for Safety in Water. Energy Efficient with excellent Gallons per minute (GPM)/KW Rates. Industrial Strength Design.
2 Year Warranty.
All hardware, standard Dock mount quick release bracket and instructions are included in the box for assembly.
You can add an Oscillator to this order by using the drop down menu beside 'choose cord length or add oscillator' by clicking the down arrow will give you more options. The 360 Oscillator is a tool that allows your Thruster to move in a 360 degrees motion and start and stop at any location. This unit is very handy for setting it and forgetting it . You will have a set up option to start at one desired location and end in a other. You do not need to spin this unit in a 360 but does have that capability. Most users running this on the end of the dock would use about 180 degree to fan an area around the front of you dock.
If you do not add the oscillator to your order you will receive a rotational pole mount where you would rotate this unit manually. You can see how this works by watching the video below
If you require a different mounting bracket please call store so we can adjust your order before processing.(905)373-4422
1 Horsepower Single Phase, 7.0 amps (115v), 1650 Rotations per minute (RPM),
1350 gallons per minute (GPM), 26 pounds of thrust.
Patented heavy-duty PVC Venturi housing designed for superior water flow with motor/propeller protection.
SJTOW UL & CSA approved under water rated cable, available in 50' and 100' in 115v with quick disconnect power cord. 16/3 gauge.
(4 legs bolts , 2 set screws , 2 big hose clamps to clamp the motor to the pitch angle bracket and one Standard quick release bracket, 5' rotational pole or Oscillator)